Netgear patch said to leave backdoor problem in router

A security researcher claims Netgear's firmware update further hides the backdoor, but doesn't remove it

The security researcher who identified an admin backdoor in a range of routers last year has found that Netgear's patches don't adequately address the security issue.

In December, Eloi Vanderbeken discovered that he could get a remote root shell on his Linksys WAG200G router without authenticating when connecting to the device over TCP port 32764. The same backdoor feature was later confirmed in 24 router models sold under the Netgear, Cisco Systems, Linksys (now owned by Belkin) and Diamond brands and it was believed to have its origins in firmware code developed by Sercomm, a Taiwan-based manufacturer of wireless and broadband equipment that serves as hardware partner for multiple networking vendors.

Vanderbeken, a researcher at Paris-based IT security firm Synacktiv, recently downloaded and analyzed a firmware update released by Netgear for its DGN1000 Wireless router and DSL modem that was supposed to have fixed the issue. He found that the backdoor is no longer directly accessible over port 32764 TCP, but that it can be reactivated by sending raw Ethernet packets to the device with protocol type 0x8888 and the MD5 signature of the router model (DGN1000) as the payload.

"The 0x8888 ethertype and packet structure is used in an old Sercomm update tool," the researcher said in a report of his findings.

Once the device receives such a packet, the backdoor is reactivated and starts listening on port 32764 again, Vanderbeken said Tuesday via email.

The vulnerability is now harder to exploit because an attacker can only send the required raw packets from the same local area network as the targeted device or from one hop away, like its ISP. However, the backdoor is essentially still there, according to the researcher.

This mechanism involving specifically crafted raw Ethernet packets does not exist in the older firmware, he said. "It was added on purpose, to reactivate the backdoor. This is 100 percent intentional."

In addition to giving attackers the ability to execute commands with root access -- the highest privilege on Linux systems -- the backdoor also allows flashing the router LEDs by sending special messages to the device.

"I don't know if it was Netgear, Sercomm or both who decided to keep the backdoor open but it is deliberate," the researcher said. "I don't know why. There is no legitimate reason to do so."

There is a physical button that can be used to reset the router to factory defaults if needed in technical support cases and the setup wizard doesn't require the backdoor for remote configuration either, Vanderbeken said. "It's used internally by some services to update the configuration but it is never used from outside the router. There is no reason to keep it open."

The vulnerability was properly patched in at least one device that had previously been identified as affected -- the Cisco WAP4410N wireless access point. A firmware update for that device causes the backdoor to listen only to the loopback address, meaning it can't be accessed remotely, according to the researcher.

The new mechanism for reactivating the backdoor might be present in other previously affected routers that received firmware patches for the vulnerability, but so far the researcher has only tested the update for the Netgear DGN1000.

"Sercomm is the manufacturer of the routers found vulnerable to the port 32764 backdoor," the researcher said. "It's almost certain that they introduced the backdoor and the new service to reactivate it."

Netgear is in the process of issuing firmware updates for products that contained the backdoor: DG834G, DG384B, DGN3500B, DGN2000B, DGND330Bv2, DM111Pv2, DM111PSPv2, JNR3210, DGN3500, DGN1000 v1, DGN1000 v2 and DGN1000B. Updates had already been released for the last four models.

"All but two -- DM111PSPv2 and JNR3210 -- of these products are no longer being manufactured," the company said in an emailed statement.

"We are currently working with our technology partner, Sercomm, to investigate the assertions that the firmware patch did not remove the vulnerability," the company said. "If we find that any issues exist, we will make the necessary firmware changes and update the installed base."

Sercomm did not immediately respond to a request for comment.

Join the CSO newsletter!

Error: Please check your email address.

Tags patchesLinksysNetworkingbelkinspywareExploits / vulnerabilitiesprivacynetworking hardwareCisco SystemsintrusionSynacktivsecuritynetgearAccess control and authentication

More about Belkin AustraliaCiscoCiscoLinksysLinuxNetgear Australia

Show Comments

Featured Whitepapers

Editor's Recommendations

Solution Centres

Stories by Lucian Constantin

Latest Videos

  • 150x50

    CSO Webinar: The Human Factor - Your people are your biggest security weakness

    ​Speakers: David Lacey, Researcher and former CISO Royal Mail David Turner - Global Risk Management Expert Mark Guntrip - Group Manager, Email Protection, Proofpoint

    Play Video

  • 150x50

    CSO Webinar: Current ransomware defences are failing – but machine learning can drive a more proactive solution

    Speakers • Ty Miller, Director, Threat Intelligence • Mark Gregory, Leader, Network Engineering Research Group, RMIT • Jeff Lanza, Retired FBI Agent (USA) • Andy Solterbeck, VP Asia Pacific, Cylance • David Braue, CSO MC/Moderator What to expect: ​Hear from industry experts on the local and global ransomware threat landscape. Explore a new approach to dealing with ransomware using machine-learning techniques and by thinking about the problem in a fundamentally different way. Apply techniques for gathering insight into ransomware behaviour and find out what elements must go into a truly effective ransomware defence. Get a first-hand look at how ransomware actually works in practice, and how machine-learning techniques can pick up on its activities long before your employees do.

    Play Video

  • 150x50

    CSO Webinar: Get real about metadata to avoid a false sense of security

    Speakers: • Anthony Caruana – CSO MC and moderator • Ian Farquhar, Worldwide Virtual Security Team Lead, Gigamon • John Lindsay, Former CTO, iiNet • Skeeve Stevens, Futurist, Future Sumo • David Vaile - Vice chair of APF, Co-Convenor of the Cyberspace Law And Policy Community, UNSW Law Faculty This webinar covers: - A 101 on metadata - what it is and how to use it - Insight into a typical attack, what happens and what we would find when looking into the metadata - How to collect metadata, use this to detect attacks and get greater insight into how you can use this to protect your organisation - Learn how much raw data and metadata to retain and how long for - Get a reality check on how you're using your metadata and if this is enough to secure your organisation

    Play Video

  • 150x50

    CSO Webinar: How banking trojans work and how you can stop them

    CSO Webinar: How banking trojans work and how you can stop them Featuring: • John Baird, Director of Global Technology Production, Deutsche Bank • Samantha Macleod, GM Cyber Security, ME Bank • Sherrod DeGrippo, Director of Emerging Threats, Proofpoint (USA)

    Play Video

  • 150x50

    IDG Live Webinar:The right collaboration strategy will help your business take flight

    Speakers - Mike Harris, Engineering Services Manager, Jetstar - Christopher Johnson, IT Director APAC, 20th Century Fox - Brent Maxwell, Director of Information Systems, THE ICONIC - IDG MC/Moderator Anthony Caruana

    Play Video

More videos

Blog Posts